Re: dash code I don't recognize
Originally Posted by
#1 Crossfire Girl
Hi,
I am a new Crossfire owner and love this car and am trying to learn all the ins and outs of it.
I have a code that is showing up, briefly when I start the car, started 4 days ago.
It comes up instead of the mileage.
It looks like a cursive L with a cross like a little t through it, or possibly like someone running.
But it doesn't look like a wrench.
It started with -100 after it then -200, -300, -400 and now 500.
Possibly the numbers mean mileage?
Thanks
The -200, -300, -400 and so on is miles overdue for service - Most likely an oil change
Here is the procedure to reset back to 7000 to start a new countdown until the next service / oil change
RESETTING THE FSS MAINTENANCE INDICATOR AFTER AN OIL CHANGE
1) Move the ignition switch to the “RUN” position
2) Within 4 seconds of moving the ignition switch into the
“RUN” position, press the reset button for the trip odometer
twice within one second
The display for the FSS service
request is activated for 10 seconds
3) During the 10 seconds the FSS service request is displayed,
move the ignition switch to the “OFF” position
The FSS service request will continue to be displayed
4) Press the reset button for the trip odometer and
hold
5) Move the ignition switch to the “RUN” position
6) Continue to press and hold the reset button for the trip
odometer (about 10 seconds) until the audible signal
sounds and the new start distance appears in the display
The tool symbol should disappear at this time
Last edited by Valk; 11-01-2014 at 03:53 PM.