Re: Engine pulleys
Originally Posted by
tbudlee
O.K., I can see my statements could be confusing. I ordered the idler pulley from Rock Auto that showed clearly to be only a 6 groove. I did not know at the time I needed an 8 groove pulley. I called to tell them they listed the 6 groove as the correct one for an SRT and the guy said it was correct per Chrysler and therefore I had to pay to send it back. Thanks again Robby363 for your help.
That is a beetch of a problem, I can see both sides of the problem, but in all fairness I would think Rock Auto would admit liability and pay just so they do not get a bad name. It is cheaper to keep a customer than to replace him with another, sometimes that policy goes out the door when a buck has to be spent.
I would remind them that on this forum and their Face Book forum, if they have one, a bad comment costs them money and is a blotch on their
reputation.
Originally Posted by robby363
If you need the smooth idler pulley number 8 in the diagram this is the part# 112 202 01 19. I had to replace mine shortly after I replaced the supercharger idler pulley. The cheapest one I could find was this one on ebay.
It is possible that the bearing can be replaced on its own for less than $20.
Last edited by onehundred80; Jan 20, 2015 at 10:26 AM.