Thread: vacuum tap point for gauge, n/a
View Single Post
Old Feb 17, 2015 | 05:23 PM
  #6 (permalink)  
ala_xfire's Avatar
ala_xfire
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: vacuum tap point for gauge, n/a
Yes, those 2 hoses connect to the same vacuum source as the solenoid I mentioned, just after the throttle body.


I have the oil catch can installed, so the 2 small vc hoses got to it first, then it connects back to the vacuum source.
( you can click the above picture, then click ENLARGE )
 
Last edited by ala_xfire; Feb 17, 2015 at 05:25 PM.
Reply
0