up to date on my testing ,,, updated 6-18-2005 with 185 crank pulley

Testing : 346vs 327 sc pulley only//178vs 185// 178with sc pulley vs 185 with sc pulley
The last two month with my car..
Forgot left traction control on , got wheel hop, broken axle.
drove it home , then drove it down to JR's 140 miles
could not get the pass side axle ,out ( we all tried)
replaced all three bushing for mounting the diff.
reinstall the 3.27 w/ wavetrac and my two spare axles

March 11 2015
test 1,,, 3.27 stock pulleys,DR's,,, I am looking at the time slips.
11.35 @ 123,,,1.72 60'
11.39 @121,,,1.72 60'
11.37 @ 122,,,1.73 60'
11.37 @ 122,, 1.72 60'
11.23 @ 123,,, 1.68 60'
11.28 @ 122,,,1.64 60'

May 15 2015
test 2,,, 3.46 with stock pulleys DR's 26” tall
11.29 @ 123,, 1.72 60'
11.29 @ 122,,, 1.71 60'
11.28 @ 122,,, 1.69 60'
11.21 @ 123,,, 1.66 60'
11.28 @ 122,, 1.70 60'
11.24 @ 123 ,, 1.67 60'

May27 2015 first burn out forgot and left TC on, wheel hop & broke driver's axle.

June 3 2015
reinstalled 3.27 rear and my spare axles
street tires,275 35/19 26.6 tall
it was going to rain so my DR's were in the trunk along with the jack, extra 80lbs
stock lower pulley and smaller SC pulley,3.27 rear
11.43 @ 122 ,,1.76 60'
11.31 @ 122 ,,1.72 60'
11.37 @ 122,, 1.76 60.
11.29 @ 122,, 1.70 60'
11.32 @ 122,,,, 1.71 60'

June 17 2005
185 pulley 327 rear, and drag radials
10.96 @ 126,,, 1.68 60'
11.00 @ 126,,, 1.68 60"

June 19 2015 327 gears 185 lower & super charger pulleys STACKED
will post results later tonight.




the 346 does a lot, so yes i want to get the 346 set up back up and running even if i have to go with a ford 9" jim