Re: How to Repair Relay Control Module (RCM) - (Mystery no Start)
Bill,
Not a lot to report, but I did get a chance late afternoon to check voltage. With a decent meter, I had 12.35v, with a drop to about 12.20v with the key on, or with lights on. I couldn't notice an additional drop when the key went to "start," but didn't work hard at it. I have in on a slow charge and will check again tomorrow afternoon. I think I should have gotten closer to 13.5v with a good fully charged battery.
Will still check and probably resolder the RCM joints as this thread instructs.
More to follow.
Michael