Thread: DIY Code 3 Intake Question
View Single Post
  #3 (permalink)  
Old 08-19-2015, 08:27 AM
Ralph289's Avatar
Ralph289
Ralph289 is offline
Join Date: Jan 2015
Location: Central Florida
Posts: 182
Likes: 0
Received 2 Likes on 2 Posts
Default Re: DIY Code 3 Intake Question
Originally Posted by maxcichon
I would use 1/16" aluminum and a sheet of Buna (neoprene) as a gasket.
Yes that might work.
I was thinking just use the plexiglas plate I have now but OVER the filter that is on there now and UNDER the square frame that is on there now. Just may need longer screws.
 
Reply Like