Thread: Y Pipe for intake
View Single Post
Old Sep 13, 2015 | 07:20 PM
  #11 (permalink)  
ATX SRT-6's Avatar
ATX SRT-6
Joined: Sep 2015
Posts: 175
Likes: 1
From: Austin TX
Default Re: Y Pipe for intake
Yep, they're ABS plastic good up to 180F I believe.
Here's a T for 8 bucks at Wally World
MUELLER INDUSTRIES 03405


These fittings would require gluing a short piece of straight pipe in each inlet so you could clamp a silicone coupler to it. The OD of 3' ABS is 3.5" so you would need to use a 3" to 3.5" reducer to attached to the TB maybe?
 
Last edited by ATX SRT-6; Sep 13, 2015 at 07:26 PM.
Reply
0