View Single Post
Old Oct 22, 2015 | 08:12 AM
  #28 (permalink)  
BuffNSoFly's Avatar
BuffNSoFly
Joined: Jul 2007
Posts: 214
Likes: 0
From: Irwin, Pennsylvania
Default Re: No Start - Need addition solutions

After testing the PCM all the pins I found pin 35 (Ground Fault) has no voltage. Looking at some diagrams that pin sends to the pulse module and then to the starter.

Going to crack open the PCM and follow that pin and see if any fuses/resistors are bad. Hopefully this solves my problem. I think I have better luck fixing the PCM that trying to find another one. Literally after hours could not find one anywhere.

I still have a suspicion about the key transponder is bad. Unlocking and locking the doors would rule that out right?
 
Reply