Originally Posted by
32krazy!
i think bench racers don't know squat about building these motors. i ran 65 and 178 stacked with 550 looped rail tuned and ran 11's and was in full street trim and drove the car on the street with zero issues.
having said that if you want to run 11's all thats needed is d/r slicks, a 181 pulley a single cai and a competent tune. 11's all day
So you also learned that stacked pulleys are not needed to run 11's. Neither is a DCAI. Just ba 181mm crank pulley and a single CAI with a c:competent" tune. Let's call that a DYNO tune as Jerry will do rermote tunes if anyone finds a DYNO operator willing to spend 2 hours doing pulls. My question to you is what did the DCAI and stacked pulleys and fuel mods gain over the simple mods you list, a few tenths? For me it is torque, passing semi's easily and that feeling of being pushed into the seat that torque provides.