Ok I was able to obtain a salvaged ECU from a wrecked crossfire. Thanks to the crossfireshop.com!

This weekend I installed a new battery and new batteries in the FOB. The alarm sounded as soon as I hooked it up and noticed fuse #9 was missing so that made sense why.

I put a spare 10amp fuse in #9 but, the dom lights and locking/unlocking the doors still worked which I don't understand why.

As far as voltage testing I'm not getting any voltage out of the pulse module nor any going into from the ignition switch. Could a faulty ignition switch cause a no crank??

If not my only option is to get the salvaged ECU reprogrammed with my VIN# and hopefully things connect.