View Single Post
  #1 (permalink)  
Old 02-20-2016 | 07:40 PM
chuK_138's Avatar
chuK_138
Senior Member
Joined: Jun 2011
Posts: 1,324
Likes: 3
From: Winter Park, FL
Default Zeitronix IAT sensor question

Probably a stretch to ask, but is there a way to tap into our IAT sensor to feed the output to a Zt-2? Noticed that our stock sensor has a simple connection with two wires. Their sensor uses two wires. I don't have a problem buying their sensor. Just wouldn't want to make an extra hole in any of the components to mount it. Any help would be appreciated. I tend to stay away from wiring.