Geeze, how much did he collect from you guys ? My dyno only cost $90 and that included a Fuel / Air ratio mapping. Even his #'s look sketchy, though all dynos read slightly different, a stock Crossfire will turn about 155-160 whp and 210-215 ft lbs of torque. Peak HP will be achieved at appx 4,750-4,850 rpm and peak torque will occur at appx 4,250-4,350 rpm. The fuel / air ratio he's showing is way too low, both Woody's stock Crossfire and my modded Crossfire are running 14.5 +/-, he's showing below 13. ????

The dead giveaway is the car running up to 6,200 rpm on the dyno. If I were the inquisitive kind, I would call modacar that did his dyno and ask some key questions about how they could have run the car up to 6,200.