02-04-2017. Rebuilt the driveshaft with new bearing, carrier and guibos. Installed NeedsWings cat delete pipes, all in all a productive 6 hours. minor exhaust leak, so I'll try realigning pipes again tomorrow. Drive-line vibration still noticeable, but when I dropped the exhaust rear section I noticed that the heat from the pipes had cooked one of the CV boots (inboard, left) and there is grease everywhere, so I ordered new half-shafts and a DEI heat shield to protect the new CV boot from Amazon. That's next weekend's project. I'll attempt to rebuild the original half-shafts in the summer, if I can find a replacement CV joint.

02-05-2017. Realigned the exhaust v-band flange on drivers side. No more exhaust leaks. Lesson learned; get drivers side pipe on before tightening the passenger side to the rear section. Very impressed with the pipes so far.