View Single Post
Old May 1, 2018 | 12:01 PM
  #5657 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Default Re: What did you do to your Crossfire today?

Finally got the Evap system reset after removing the battery in the winter.
It took a while, I finally just did half of the Chrysler driven cycle and it cleared up. At first all of them cleared after a small drive except for the evap system and the secondary air system check.
The evap system seems a bit hit and miss in its requirements.
I used my BlueDriver hooked up to the OBD port and my iPad.
Off now for the smog test.
Edit
Passed the emissions test with flying colours, in two years if I am still around I will have to do it again and take a driving test for the over 80’s. That test will be tough with all the bad habits acquired over the last sixty odd years.
 

Last edited by onehundred80; May 3, 2018 at 11:29 AM.
Reply