Thread: First Dyno run
View Single Post
Old May 5, 2018 | 12:20 PM
  #1 (permalink)  
AtomicBubbles's Avatar
AtomicBubbles
Joined: Apr 2017
Posts: 53
Likes: 0
From: Huntington Beach
Default First Dyno run

Alright so yesterday I decided to dyno the SRT
Unfortunately I do not have a before and after showing the performance gains of the mods that I have... which are

65mm pulley
DCAI Needswings
Eurocharged Tune

Here is a video of it... I couldn't get a video of the engine bay the way his shop was setup.. oh well

https://www.youtube.com/watch?v=9j4s...ature=youtu.be

Might need a TCU upgrade as the stupid thing will not hold gear in "manual" mode. the care kind of likes doing what it pleases, and as a result downshifts from 4th into 3rd at WOT

But the end result was 333 RWHP and about 330 TQ

Not sure if those numbers are any good compared to others with the same setup.

but Im still very pleased non the less
 
Reply