Originally Posted by michael savage
i put on my 350z a clear bra by 3m it was the worst thing i ever did it still would get nicks in it and when you wash your car you have to be careful on all the edges or it could start to peel do your self a favor and don't do it! i traded my 350z for a crossfire and i would never go through that crappy clearbra again . good luck to the peole who have did it already
Sounds to me like a poor installation. If the surface area was cleaned properly, and the cuts were done right, there should be no reason for the film to lift up on its own. It is damn near impossable to remove it with out applying heat to the film.
As for nicks, I'd rather the 3m take the damage than my clearcoat / paint.