Thread: How to program your own key. SAVE $$$
View Single Post
  #222 (permalink)  
Old 10-21-2018, 08:22 AM
RON-L-RAC's Avatar
RON-L-RAC
RON-L-RAC is offline
Join Date: May 2018
Location: s.i.,n.y.
Age: 70
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Talking Re: How to program your own key. SAVE $$$
Originally Posted by Shawnkey
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.

STANDARD PROCEDURE - TRANSMITTER PROGRAMMING

The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE

Transmitter programming by the customer is done by performing the following steps:
  1. Insert the key into the ignition switch.
  2. Press either the lock or unlock button momentarily twice.
Turn the key in the ignition switch to the ON/RUN position within 30 seconds.

Hope this is useful and saves you $100.

Shawn
God Bless. Shawn, thank you for not being selfish, but instead sharing your info with other Crossfire owners. Again, that was a very nice thing to do for others. Way to MAN-UP!
 
Reply Like