Originally Posted by
Viper-666
If your Skreem already works this would the way to go.
Of course you can do it that way with my preprogrammed EEPROMs but then you have to let progamm your PCM so that it accept this codes.
That is the hardest thing I am working on. I found out, that the big plug is from TE Electronics but Daimler has there Hands on it and they can't give any Information about that. But this doesn't matter because you can buy them from Mercedes a little pricey but you get them. But the other side where you plug this in is a whole part of the skreem module and that you doesn't get to buy. Maybe someone here has connections to TE Elektronics, they have similar plugs listed and I buy also one set, but the Mercedes plug don't fit.
I think I have to buy all used Skreem modules... The advantage would be that I'd have also the right case, but I'd have to solder everything off and on... a lot of manual work.
then we may peel off the wires and solder a male/female adaptor of any kind we can get, in a "y" extension that fits whatever connector you have or can find and still leave the stock available.
of course, this is for those who can solder-and are willing to do so. i wouldnt mind doing so. even provide the links for the connectors to fit.