Originally Posted by
THETESTER
Hi Guys
I am ready to do the "breather" repair. I have read this thread from end to end and believe I have a good understanding of what is required. The only thing I have been unable to determine is the bolt head type for the long bolts that hold the breather and rocker cover to the head. I have the smaller Torx screw fitting. Any help appreciated.
The screws used to hold down the valve cover have a male TORX head. Don't remember the exact size, but you can buy a small set of 3/8" drive female Torx head sockets at your local auto parts store. The right socket will be included.