Today I finished wiring my 360 camera system and did its first test. Now all that is left to do is calibrate the cameras so the birds eye view lines up correctly. I was going to do it today but its starting to rain so ill have to do it another time. I reached out to the manufacturer of the system and sent them an ariel photo of my car. They are going to send me a new firmware file so car in the software matches. I also started taking measurements of the new steering wheel I want to install. I was going to use it for my other car but I think it will use it in this car so I can take advantage of the steering wheel buttons and paddle shifters. I need to machine an adapter that will allow the two different spline sizes to mesh together and finish making the controller to interface with the radio and instrument cluster. The wheel is the last thing I wanted to install on the interior (and maybe a real cup holder &#128517. After this, I can finally work on the cosmetics of the dash/center console and give it a proper paint job. Ill post a video of the cameras after they are calibrated (probably next weekend)