View Single Post
Old Oct 30, 2020 | 11:06 PM
  #10 (permalink)  
CROSSFIRERUSH's Avatar
CROSSFIRERUSH
Joined: Jul 2018
Posts: 260
Likes: 13
From: SE MICHIGAN
Default Re: Convertible top not working

hemi135,

Like you I was in need of this same part. We bought ours at the end of May and I went in with my eyes wideopen as the top, although almost new, would not automatically work. Once this sensor was replaced, then the cylinders all let loose. Top Hydraulics to the rescue. These cars are worth fixing and are a blast to drive.

Researching here I found the part # on this sensor is printed on the back side of it. There are 2 small bolts that hold that sensor to your top frame. The part # you are looking for is: Convertible Top Sensor 1938202110. Do a Google search on that part #. Good luck in your hunt . Check salvage yards as well as Facebook Marketplace for ads on parts cars the owners are parting out.

I got lucky buying mine used from "fleabay" through a fellow Crossfire owner "RONMAN" in Texas. Check also Craigslist. Might have good luck searching there under whole cars as well as parts.

Good luck and all the best in your hunt.

Regards,
 

Last edited by CROSSFIRERUSH; Nov 1, 2020 at 03:21 PM. Reason: Credit given for help
Reply