View Single Post
Old Feb 1, 2021 | 01:22 PM
  #6 (permalink)  
GraphiteGhost's Avatar
GraphiteGhost
Senior Member
Joined: Jul 2009
Posts: 6,325
Likes: 777
From: Central South Carolina
Default Re: Looking for this engine cover

Originally Posted by Dub Dublin
I think that photo might be the production prototype car. IIRC, in the photos I've seen of it, it's SSB with a Cedar interior, often with Euro plates. The interior in particular (which might be the same as that shown below as a disembodied styling buck) is clearly different from what actually became production - brighter silver color (nicer looking, but probably a reflective PITA), carbon fiber instrument panel rim, and different switchgear, radio, vents, steering wheel trim, etc. Although I'm not certain, this may be an underhood photo of that car. It's very close to the production car, but different enough to be pretty intriguing - for instance on the interior photo below there's another red button below the hazard light switch that replaced the start button of the original concept car. (Awesomely labelled simply, "Go!")



That picture IS NOT a car on the road. If you look closely (besides all the photoshop cutouts above the level of the dash), the fuse panel is missing, and the drivers footwell is all wrong.


.
 
Reply