Originally Posted by
roychez
My crossfire ran fine for a couple months, I was driving on the highway when my car when it went into limp mode again. I coasted off the highway stopped and the car would not go forward, I turned it off and back on and it went to 2 gear, I crawled back home where it sat for a few days. I started it up and it drove normal, I have no idea what to do next , conductor plate was changed out a couple years ago with only 15000 miles on it.
any advise would be appreciated
The probable cause is a faulty solenoid.
I had a similar problem in a Chrysler 300 which used the same basic transmission, it would be fine, then go into limp mode, get fine again until it failed 100% of the time.
A new solenoid in the electrical plate fixed the problem. It will not fix itself.