Originally Posted by
AlCapone
Spot on 180! Now that I can see how it's all put together, I'm sure that I can get it apart, then re-glue the silver plate to the backing plate. Yes, a previous owner has fitted an after-market radio and I suspected that something had been damaged in the process. Thanks again - this forum is the business!
Acetone can be used as a cement to attach the two pieces together. It basically liquifies the surface of the plastic and then you hold them together for ten seconds or so.
Apply some acetone to each face and then add another coat on top of that and then join them.
The plastic is PC/ABS and readily joins with acetone, or use JB Weld Plastic Bonder.
Check other areas to see no other separation has occurred.