Other home projects were pressing so I was away from this project for a few days. After finding that the screw to the lock assembly is allen and not torx the driver door handle removal went fairly quickly. Moving to the pass door I could not got the allen wrench into the screw head. After trying for way too long I stuck my endoscope in the hole, and with the screw head straight ahead I noted the angle of the scope and matched it withe the allen driver and got that screw out. So both handles are off, finally. Thanks to all who provided good info and photos. The poor instructions I was using early on for this project caused me a lot of frustration. Now to get them and the windshield trim to the paint shop.