Re: crossfire battery: my experience
conclusions
state of health is the key.
i have found the way to learn the real condition of the battery. it is by measuring the State Of Health (SOH).
( but of course, if some1 has found this too before me, please bring the link. i dont want to take credit if am not the 1st)
1-first, the way it was done was by checking volts.
2-but then Kent Bersgma proved that it is not enough; he said that you have to measure cold cranking amps (CCA).
but then i learned that the best way is by getting the state of health.
before, you had to calculate it, but recently some1 has found the way to get it directly with a tester like this:
thats all you need. now you can learn the actual condition of a battery, with facts, cold figures.
now, if you want to learn what on earth is that SOH, here is a link that explains it in great detail. the thing is, it was written when there were no devices that could do it automatically. just learn what is explained. https://www.mpoweruk.com/soh.htm
Last edited by phil alvirez; May 30, 2021 at 11:53 AM.