View Single Post
Old May 31, 2021 | 11:30 AM
  #1 (permalink)  
kernol2's Avatar
kernol2
Joined: Jun 2019
Posts: 17
Likes: 0
From: VA
Default Convertible top function

I have noticed that when I'm putting the top down or up I have the same concern, the front portion of the top slaps down onto the frame. I have looked through all of the threads and do not see any comment on my concern. It started doing it just when I was putting the top up, especially if on a hill, at the point of the bonnet closing. Now when I put the top down it will slap down on the front and stop the completion, until I push the front up again. Does not matter if I am on a hill or flat ground.

Thoughts??
 
Reply