Thread: adjusting shocks
View Single Post
Old May 31, 2021 | 06:23 PM
  #47 (permalink)  
phil alvirez's Avatar
phil alvirez
Senior Member
Joined: Jun 2019
Posts: 1,047
Likes: 40
From: windsor ontario next to detroit
Default Re: adjusting shocks

the largest bump stop (#2 in the drawing), has to be enlarged to fit over the shaft. and rubber bushings (4 and 6 in the drawing) have to be drilled too.
 
Last edited by phil alvirez; May 31, 2021 at 06:53 PM.
Reply
0