Thread: Srt6 2006
View Single Post
Old Jul 3, 2021 | 04:44 PM
  #6 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Srt6 2006

Originally Posted by UrbanE
If you’re still trying to get into the boot, one of the only ways is through the drivers side licence plate light located on the under of Boot (naturally above the license plate). I’ve done it so I know it can be done

it’s hard to miss the latch but the mech to lock unlock is right there. I’ve attached a few images, I was able to open mine with a long, narrow slotted screwdriver. We you’re messing around in that area, it would be a great idea to apply masking tape all around the area you are working on. The time when it’s hot, and patience runs thin, is the time when you ship with the screwdriver and scratch the paint (that’s not my experience talking but I’ve seen it happen.

Another great approach is to look at a few of the lock mechanisms for sale on eBay. The images may give you some valuable insight.

Good luck, it can be down just take your time n
I did this aid some time back. I missed this thread.
With a screwdriver push the black lever as shown and it is unlocked, the red lines represent the hole for the left license plate light.


 
Reply