Old Sep 13, 2021 | 09:04 AM
  #16 (permalink)  
phil alvirez's Avatar
phil alvirez
Senior Member
Joined: Jun 2019
Posts: 1,047
Likes: 40
From: windsor ontario next to detroit
Default Re: cooling the motor by removing the pan under

very interesting. thanks for sharing. i was on the idea that the exit should be near the rear, so air blows from the front around the engine and then exits behind. but if your way temp drops, then why not.
and of course, that the air filters are there at the back so there is no room there.
the only thing that must be taken in account is that rain/whatever does not run inside with the openings.
 

Last edited by phil alvirez; Sep 13, 2021 at 09:36 AM.
Reply