OK\
I have even MORE questions.
My LSC-100A module has TWO red wires, and ONE black wire.
ONE red wire has a tag on it that says "This wire to LED light". So I assume this hooks up to the blue/black wire that runs to the LED light.
So if I hook this wire to the blue/black wire that goes to the LED light, then what do I do to the OTHER blue/black wire end that I just cut?
Also, everyone keeps mentioning TWO black wires. I don't have 2 black wires on the flasher module. With the ONE RED WIRE hooked to the LED light wire, I then have one black wire and one red wire on the other end of the flasher module. I assume this is the INCOMING end of the flasher module.
Now, WHAT GOES ON THE INCOMING RED WIRE GOING INTO THE FLASHER MODULE?
What attaches to the BLACK WIRE GOING INTO THE FLASHER MODULE?
None of the pics in the tutorial actually show what it should look like when finally connected. The pics are all amputated so you can't see the actual wire arrangement.
I'll wait to do this mod until I get these questions settled. I have all the parts and tools, just no good idea of how the wires connect, or what they need to go to. This tutorial is NOT clear at all on that.