View Single Post
Old May 10, 2022 | 07:55 PM
  #5 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: License plate light replacing with LED

Originally Posted by Deepsea21
I found that these lenses can crack because people keep slamming the trunks shut and the lenses (being on the hatch) take a beating every time. Lower the trunk slowly and then gently let it drop. This car's trunk has a wonderfully designed closure mechanism that seals perfectly and firmly with a click. There is no reason to be slamming the trunk shut on these cars. I have thought about replacing the stock bulbs with LED's though for the added night visibility they provide but have only thought about it as I'm not sure I want that much brightness on the back of the car based on some of the pics I've seen of others who replaced them.
I think you are wrong in your assumption, tighten those screws until they will go no more and they will crack.
It is a poor design and should only nip the seal not crush it.
I have the LED replacements but agree they do look a bit too bright.
 
Reply