View Single Post
Old Aug 18, 2022 | 09:23 PM
  #6 (permalink)  
wjt's Avatar
wjt
Joined: Jan 2022
Posts: 12
Likes: 0
From: Russellville, AR
Default Re: Crankshaft Position Sensor

I did replace the wires, neglected to mention that.
I don’t know which way to go here. I’m going to replace the manifold again and try to get it running again but I’m nervous about not knowing what is the root cause. I will check the vacuum lines real close also. I would call it a backfire, it was literally a really loud bang accompanied by a cloud of blue smoke.
 

Last edited by wjt; Aug 18, 2022 at 09:28 PM.
Reply