Re: Interior paint
Originally Posted by
bluecoupe
Dennis, did you use an airbrush to apply the interior paint or a bristle or foam brush?
bluecoupe
I purchased the dark graphite to touch up that was specific to the SRT6 interior paint from the German source. The dark graphite (XDV PN#F0506904AA) and medium graphite (BD5 PN#E05134799AA), were sold by Chrysler dealers for the Crossfire Limited models with Tutone gray interiors, not the SRT6 interior.
Because the blemishes were located on the console (both sides), I used a foam brush, dabbing the areas that required a touch up. It blended perfectly with the original paint by using a minimal amount of paint. If it was a larger area needing paint, I would have used an air brush to complete the task.
I shook the container (with ball Bering agitators) for a longer period of time and poured a small amount into a small plastic cup, to use a small foam brush.
I hope this helps....
Dennis
DTMenace
Last edited by DTMenace; May 20, 2023 at 03:27 PM.