Here is a new set of custom clear tail lights I made recently for my personal car. I remove the stock lense, add custom lighting, and hand mold a clear lense. I opted to run a dual tail/brake setup so i occupied the turn signal slot with an addition brake/tail light and moved the turn signal to the reverse light location. I then purchased a independent reverse light and mounted it inside my rear diffuser. In my state, clear lenses are legal so long as the tail/brake light are red in color (as they are) and the turn signal is either amber or red (mine are amber). I do build personal sets for people. They are sold for "offroad/show use only". I can do any off the shelf lighting inside ie: sequential turn signals, HALO/Angeleye, LED, any colored housing inside, clear lense, smoke lense, frosty white lense, or stock colored red lense if your state does not allow clear lenses on tails and you would like to have custom lighting inside. Contact me if you are interested.