View Single Post
Old Aug 25, 2024 | 01:59 AM
  #21 (permalink)  
M60A3Driver's Avatar
M60A3Driver
Senior Member
Joined: May 2023
Posts: 2,973
Likes: 1,564
From: New Jersey
Default Re: Crossfire issues

Originally Posted by Too many cars
I emailed DJ Tighe this past Wednesday and asked about current prices to have him repair the RCM from the 04 I'm working on. I have not heard from him. When he repaired the RCM out of my free 04 that I was working on about 4 years ago, he was quick to reply. I'm wondering if he has changed his email address since that time, or has he retired from repairing the RCM? The address I have is tighed1@hotmail.com
Thanks for any info on this situation..
Also, I had purchased a replacement cubby to use in place of the broken cup holder. Well, I was hoping to just slide it in the hole left when I removed the cup holder, but it was too tight a fit. It likely would fit if I removed the center console and then took out the remains of the broken cup holder frame. That is what I was trying to avoid. So I spent an hour modifying the front of the 3d printed tiny box so that it would slide into the console. $34 shipped from Ebay. Think if it were to happen again, i would just build my own.
This car also has a penchant for burned out bulbs. Drivers side marker, passenger rear side marker, drivers parking light, no bulb at all in passenger side fog light, and one of the overhead dome lights is out as well. All are fixed except the dome light which I should get to tomorrow. Then back to fine tuning the bumper repair. Oh, and someone installed a Pioneer radio/etc. which only works out of the passenger side speakers. Checked the balance and fade, etc., but that didn't help. Wiring or internal problem I suppose.
Maybe DJ is on vacation or at an event?
 
Reply