Crossfire Gal,

Here's a link to a pic of my XM install.
https://www.crossfireforum.org/forum...3&d=1157305450

It's a Roady2. I used the little bracket that clips to the air vent. It's been on for a few months, no problems. I did remove the dash a bit and wired my power adapter into the wiring for the cigarette lighter. Then I routed the antenna and power wire out the side of the dash closest to the Roady. Pretty clean install (he adds as he pats his own back - hehe).
It took about and hour or so to do.