Old May 3, 2025 | 07:12 PM
  #17 (permalink)  
M60A3Driver's Avatar
M60A3Driver
Senior Member
Joined: May 2023
Posts: 3,180
Likes: 1,726
From: New Jersey
Default Re: Hydraulic Ramps for the our Xfire Maintenance!

Originally Posted by Nelson G
With the blocks, it is about 21 inches. It was enough to do a trans service and rear-end fluid change, and the brakes were much easier as they were higher and not as much bending. I did purchase the blocks that line up with the jack points on the Crossfire.
Thank you for the info!
I'll check the site and look for a good deal.
 
Reply