Cigar lighter
Hello all,
I have a VERY small problem. My cigar lighter is loose in the dash. Do I have to take the console apart to tighten it? I plug a blue tooth device in it and being loose is annoying. Bill T. |
Re: Cigar lighter
Originally Posted by Billto
(Post 908599)
Hello all,
I have a VERY small problem. My cigar lighter is loose in the dash. Do I have to take the console apart to tighten it? I plug a blue tooth device in it and being loose is annoying. Bill T. |
Re: Cigar lighter
Originally Posted by onehundred80
(Post 908600)
Yes take it apart and it is a pain in the farce, you have to take out the radio, radio face plate, loosen the screws in the lighter face plate and remove it which is easier said than done. The lighter is held down by a ring which snaps under two snaps on the lighter body. I have one on the bench so I can see the arrangement.
Bill T. |
Re: Cigar lighter
Originally Posted by Billto
(Post 908613)
Thank you for the response. I think I will pass. It is annoying but with that amount of work I can live with it.
Bill T. |
Re: Cigar lighter
Originally Posted by onehundred80
(Post 908625)
If you live with it that is the smart thing to do.;)
Bill T. |
Re: Cigar lighter
Suggest you put a drop of Super Glue on it. Use the Gel type so it doesn't run.
|
Re: Cigar lighter
Originally Posted by Shamrock
(Post 908629)
Suggest you put a drop of Super Glue on it. Use the Gel type so it doesn't run.
Bill T. |
Re: Cigar lighter
Gorilla Glue Clear.
read the directions. MOISTEN the surfaces! water activated glue. |
Re: Cigar lighter
Originally Posted by Nunyadam
(Post 909052)
Gorilla Glue Clear.
read the directions. MOISTEN the surfaces! water activated glue. Bill T. |
All times are GMT -4. The time now is 10:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands