CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   All Crossfires (https://www.crossfireforum.org/forum/all-crossfires/)
-   -   Parting out (https://www.crossfireforum.org/forum/all-crossfires/79817-parting-out.html)

FISHBONE 03-22-2019 01:06 PM

Parting out
 
Fellow Crossfire owners I will be parting out a Crossfire soon. I will get the details when I get the car. So if you are needing something let me know. I own one myself and I’m not trying to get rich off of it.

Moore2575 03-22-2019 07:43 PM

Re: Parting out
 

Originally Posted by FISHBONE (Post 920663)
Fellow Crossfire owners I will be parting out a Crossfire soon. I will get the details when I get the car. So if you are needing something let me know. I own one myself and I’m not trying to get rich off of it.

where are u located

zip439 03-22-2019 08:03 PM

Re: Parting out
 
I'd like the plastic trim piece the passenger seat belt goes through. if you can get it off without breaking all the attachment tabs. It is between the bulkhead plastic and the small side window. It has Mercedes number 193 690 04 25 marked on it.

I would also like the small plastic caps that cover the windshield washer nuts holding the arm in place.

Under the car there are two bars which run from the rocker panels just below the doors forward towards the center of the car. They are attached with three bolts. I need one of those bolts. You will have to heat the bolt good before you remove it as it has lock-tight applied and will strip if not heated. They are easy to get at and removed once heat is applied.

I'll take the windshield surround trim also if that price is not too high.

Please send a private message, with prices and shipping to 36310 in Alabama. Paypal works for me.

ambidextrous 03-22-2019 11:58 PM

Re: Parting out
 
I'd like to get the latch mechanism for the trunk/deck lid.

sincitystealth 03-28-2019 09:56 AM

Re: Parting out
 
I need the two access panels for the fog lights. Shoot me a PM when you get a chance.

Jim Holian 03-28-2019 10:33 AM

Re: Parting out
 
I would be interested in the RCM (relay control module) in the box next to the battery if the price is reasonable. You can email me if you like. hoolligan1938@gmail.com. Same for the lower black grills on the front facia if they are not broken or chipped.

Jim

crossfireky 03-29-2019 10:08 AM

Re: Parting out
 
Would be interested in the front Windshield trim as well as handle for drivers door.
Might be interested in some more once you know what you have available.
Thanks.

sdultra 03-31-2019 03:21 PM

Re: Parting out
 
I am interested in the drivers door panel, or more specifically the arm rest portion of it, if it is not dimpled and rippled. Also the ac fan and vent knobs if not already cracked. Let me know. Thanks!

Padgett 03-31-2019 04:55 PM

Re: Parting out
 
I'd be interested in all of the plastic dash trim including upper and lower pieces including trim and cover for fuse box (drivers door) and passenger airbag switch (passenger door) is in nice uncracked condition for my project car. Please send price with shipping to Orlando, FL, 32819.

Ajbarbier 04-04-2019 12:17 PM

Re: Parting out
 
I'd like the plastic trim piece the DRIVER seat belt goes through. It is between the bulkhead plastic and the small side window. Also, I would love to get the bulkhead cover if you have it

ZERACER 04-04-2019 12:47 PM

Re: Parting out
 
I don't believe the OP has ever responded to anyone. LONG GONE ?

onehundred80 04-04-2019 01:56 PM

Re: Parting out
 

Originally Posted by ZERACER (Post 921322)
I don't believe the OP has ever responded to anyone. LONG GONE ?

It is always worth looking back into the earlier posts and other posts by the OP.
The mods should close threads like this.

ZERACER 04-04-2019 03:20 PM

Re: Parting out
 
Especially since it is only the 2nd post.

zip439 04-05-2019 07:28 AM

Re: Parting out
 
Actually the OP has responded to me via PM several times since his original post. I too was wondering about the validity of the post. He has been here for several years just not posting and his car is in the gallery.

Moore2575 04-05-2019 10:04 AM

Re: Parting out
 

Originally Posted by zip439 (Post 921353)
Actually the OP has responded to me via PM several times since his original post. I too was wondering about the validity of the post. He has been here for several years just not posting and his car is in the gallery.

im starting to wonder about a lot of things on here, wondering if a few on here arent using atleast 2 accounts/names making a post then replying to their own post just to make them look smarter than anyone else.

Jim Holian 04-05-2019 01:02 PM

Re: Parting out
 
If the OP is responding to someone via private message, that is a bit inconsiderate to the folks who responded to his posting and have not received a reply to their request. Perhaps he'll receive the same respect from the folks thinking about wanting something from him.

Jim

sdultra 04-05-2019 01:18 PM

Re: Parting out
 
I assumed he did not have the car yet so was being patient. Hope to get a yea or ney on the parts I desired soon.

Jim Holian 04-05-2019 01:38 PM

Re: Parting out
 
He could have let us know that when we inquired about parts. Just being polite is nice.

Jim

ncarusojr@comcast.net 04-14-2019 10:35 PM

Re: Parting out
 
If you still have the driver side and passenger side Speaker Grills with the silver surround piece’s. I will buy them.

TheGame3724 05-06-2019 10:35 PM

Re: Parting out
 
Do you still have parts?


All times are GMT -4. The time now is 03:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands