Parting out
Fellow Crossfire owners I will be parting out a Crossfire soon. I will get the details when I get the car. So if you are needing something let me know. I own one myself and I’m not trying to get rich off of it.
where are u located
I'd like the plastic trim piece the passenger seat belt goes through. if you can get it off without breaking all the attachment tabs. It is between the bulkhead plastic and the small side window. It has Mercedes number 193 690 04 25 marked on it.
I would also like the small plastic caps that cover the windshield washer nuts holding the arm in place.
Under the car there are two bars which run from the rocker panels just below the doors forward towards the center of the car. They are attached with three bolts. I need one of those bolts. You will have to heat the bolt good before you remove it as it has lock-tight applied and will strip if not heated. They are easy to get at and removed once heat is applied.
I'll take the windshield surround trim also if that price is not too high.
Please send a private message, with prices and shipping to 36310 in Alabama. Paypal works for me.
I would also like the small plastic caps that cover the windshield washer nuts holding the arm in place.
Under the car there are two bars which run from the rocker panels just below the doors forward towards the center of the car. They are attached with three bolts. I need one of those bolts. You will have to heat the bolt good before you remove it as it has lock-tight applied and will strip if not heated. They are easy to get at and removed once heat is applied.
I'll take the windshield surround trim also if that price is not too high.
Please send a private message, with prices and shipping to 36310 in Alabama. Paypal works for me.
Last edited by zip439; Mar 23, 2019 at 10:39 AM.
I would be interested in the RCM (relay control module) in the box next to the battery if the price is reasonable. You can email me if you like. hoolligan1938@gmail.com. Same for the lower black grills on the front facia if they are not broken or chipped.
Jim
Jim
I am interested in the drivers door panel, or more specifically the arm rest portion of it, if it is not dimpled and rippled. Also the ac fan and vent ***** if not already cracked. Let me know. Thanks!
I'd be interested in all of the plastic dash trim including upper and lower pieces including trim and cover for fuse box (drivers door) and passenger airbag switch (passenger door) is in nice uncracked condition for my project car. Please send price with shipping to Orlando, FL, 32819.
I'd like the plastic trim piece the DRIVER seat belt goes through. It is between the bulkhead plastic and the small side window. Also, I would love to get the bulkhead cover if you have it
It is always worth looking back into the earlier posts and other posts by the OP.
The mods should close threads like this.
The mods should close threads like this.
Actually the OP has responded to me via PM several times since his original post. I too was wondering about the validity of the post. He has been here for several years just not posting and his car is in the gallery.
im starting to wonder about a lot of things on here, wondering if a few on here arent using atleast 2 accounts/names making a post then replying to their own post just to make them look smarter than anyone else.
If the OP is responding to someone via private message, that is a bit inconsiderate to the folks who responded to his posting and have not received a reply to their request. Perhaps he'll receive the same respect from the folks thinking about wanting something from him.
Jim
Jim


