All Crossfires A place to discuss any model of the Crossfire.

Service manual for 2008?

Thread Tools
 
Old Jul 9, 2024 | 02:16 PM
  #1 (permalink)  
Sonza's Avatar
Thread Starter
Joined: May 2009
Posts: 65
Likes: 4
From: Missouri
Default Service manual for 2008?

I was wondering if anyone has a pdf of the service manual for the 2008 XF?
The reason I am asking is there appears to be some electrical differences between the 08 (at least ours) and the pre 08 cars. One example is when folks are looking for that annoying battery drain. Everyone looks at fuse 9 since that feeds that siren and is known to be an issue.
On our car, that is on fuse 13, with 9 being the air bag control unit.
The owners manual matches the card in the lid of the fuse box.
I have the standard "04-08" service manual, and everything I can find online seems to be this generic manual, but obviously there were some changes made somewhere and would like to locate a manual that is as accurate as possible for obvious reasons. The manual I have does not have any addendums to cover things that are different like what I have found in the wiring.

Thanks and everyone have a great week.
 
Attached Files
Reply
Old Jul 9, 2024 | 10:12 PM
  #2 (permalink)  
M60A3Driver's Avatar
Senior Member
Joined: May 2023
Posts: 2,973
Likes: 1,564
From: New Jersey
Default Re: Service manual for 2008?

Originally Posted by Sonza
I was wondering if anyone has a pdf of the service manual for the 2008 XF?
The reason I am asking is there appears to be some electrical differences between the 08 (at least ours) and the pre 08 cars. One example is when folks are looking for that annoying battery drain. Everyone looks at fuse 9 since that feeds that siren and is known to be an issue.
On our car, that is on fuse 13, with 9 being the air bag control unit.
The owners manual matches the card in the lid of the fuse box.
I have the standard "04-08" service manual, and everything I can find online seems to be this generic manual, but obviously there were some changes made somewhere and would like to locate a manual that is as accurate as possible for obvious reasons. The manual I have does not have any addendums to cover things that are different like what I have found in the wiring.

Thanks and everyone have a great week.
I found a set of actual 2008 Service Manual books on e bay.
2008 Service Manuals
 
Reply
Old Jul 10, 2024 | 09:43 AM
  #3 (permalink)  
Sonza's Avatar
Thread Starter
Joined: May 2009
Posts: 65
Likes: 4
From: Missouri
Default Re: Service manual for 2008?

Originally Posted by M60A3Driver
I found a set of actual 2008 Service Manual books on e bay.
2008 Service Manuals
Thanks for the link. For some reason I just didn't even think of looking on ebay.
Found what is shown as the same as the link on cd so I bought that. I will let you know how it works out.
I just prefer to have them on cd since that allows me to do key word searches a lot faster. I can just print out the pages I need that way.

Thanks again for the mind jogger.
Have a great week.
 
Reply
Old Jul 10, 2024 | 11:36 PM
  #4 (permalink)  
M60A3Driver's Avatar
Senior Member
Joined: May 2023
Posts: 2,973
Likes: 1,564
From: New Jersey
Default Re: Service manual for 2008?

Originally Posted by Sonza
Thanks for the link. For some reason I just didn't even think of looking on ebay.
Found what is shown as the same as the link on cd so I bought that. I will let you know how it works out.
I just prefer to have them on cd since that allows me to do key word searches a lot faster. I can just print out the pages I need that way.

Thanks again for the mind jogger.
Have a great week.
Hope fully that works out and is not just a rehash of the 2004-2008 manuals.
Best of luck to you!
 
Reply
Old Jul 14, 2024 | 03:25 PM
  #5 (permalink)  
Sonza's Avatar
Thread Starter
Joined: May 2009
Posts: 65
Likes: 4
From: Missouri
Default Re: Service manual for 2008?

Originally Posted by M60A3Driver
Hope fully that works out and is not just a rehash of the 2004-2008 manuals.
Best of luck to you!
Well I got the cd and took a quick peek. It looks like it is the three manuals, and to be honest, we ( I ) will need to be very thorough when looking at some of the little changes. As an example, book one shows what I would call the general overview and will have generic stuff, but shows things like the darn alarm siren on fuse 9.
But when you actually look at volume two, it shows two different circuits one for export, and one for "except" export and ours in the US are the except export wiring. Hence it shows those on fuse 13. In the three books, there are also configurations for "europe" so glad I got this cd. I did post the specific page just so anyone interested can see what I am talking about.

Not sure when this change happened, but the more we know, the easier it is to troubleshoot things.

Thanks again and have a good summer.
 
Attached Files
File Type: pdf
wiring.pdf (197.8 KB, 5 views)
Reply
Old Jul 14, 2024 | 03:40 PM
  #6 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,568
Likes: 755
From: Orange County CA.
Default Re: Service manual for 2008?

Fascinating, I've never seen a breakdown of differences.
 
Reply
Old Jul 15, 2024 | 11:34 AM
  #7 (permalink)  
dcskmail's Avatar
Senior Member
Joined: Nov 2017
Posts: 1,103
Likes: 243
From: Marine, il 62061
Default Re: Service manual for 2008?

1. 2008 factory shop repair manual 3 pc set $120 2. 2008 repair manual on CD $45 Ebay

1.https://www.autopaper.com/2008-chrys...-3-vol-set.php

2. https://www.ebay.com/itm/15505571781...Bk9SR4yUtPCWZA
 

Last edited by dcskmail; Jul 15, 2024 at 11:40 AM. Reason: spelling
Reply
Old Jul 15, 2024 | 06:45 PM
  #8 (permalink)  
Sonza's Avatar
Thread Starter
Joined: May 2009
Posts: 65
Likes: 4
From: Missouri
Default Re: Service manual for 2008?

Originally Posted by dcskmail
1. 2008 factory shop repair manual 3 pc set $120 2. 2008 repair manual on CD $45 Ebay

1.https://www.autopaper.com/2008-chrys...-3-vol-set.php

2. https://www.ebay.com/itm/15505571781...Bk9SR4yUtPCWZA
The eBay listing is the CD I ordered.

Glad to have it.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pizzaguy
Crossfire Roadster
0
Apr 1, 2024 07:07 PM
pizzaguy
Crossfire Roadster
0
Sep 11, 2023 01:46 PM
pizzaguy
Crossfire Roadster
4
May 17, 2023 07:16 PM
phil alvirez
Engine, Exhaust, Transmission and Differential
4
May 9, 2022 12:55 PM
Burnley Miller
New Member Introductions
4
Mar 6, 2018 05:50 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 05:25 AM.