well i bought the cheap headlight, taillight and fog light film from ebay just to see how it looks... and i love it. the tint is 28% on headlights and tails and the fogs are yellow. real nice look (in my opinion). so my question is how can i achieve the same look but alot better looking. the film has air bubbles looks awful and the fogs look cool but are not big enough for the fog lights, just covers the middle. the overall effect is awesome but up-close really bad. so opinions or advice would be greatly appreciated, tell me if you like the set up or how i can improve or how to make it look good. thanks.

 

pictures?

the only advice i can give about laying decals is do it wet. hose down the headlight (obviously wash it really good first) and use a squeegee to push out all the bubbles. the hair dryer is key too. and pictures!!

 

I also have tint on my lights that i bought off of e-bay. You need to use a 50/50 water and rubbing alcohol soak the lights and film front and back use a squeegee and work out the bubbles, just keep working it till you have no more bubbles. I didn't use a hair dryer.
Here are some pics.

Attachment 2425 Attachment 2426