Engine Swap Ideas
I'm working on removing and parting out the engine and trans from my 04 Limited coupe and would like to hear some ideas on what to put back in it. I can tell you it won't be Mercedes built or without aftermarket support. So lets hear your ideas..
|
Re: Engine Swap Ideas
Don't steal my supercharged small block chevy plans!
Hey Chuck, just how much of the electronics do you think will be usable without the XF brain to run things? Something I've been wondering about. |
Re: Engine Swap Ideas
How about a Dodge 500 Stroker (440) Daytona Big Block Crate Engine with 540 horsepower and 525 ft-lbs of torque, or a 7.2L "440" Stroker SRT-8 HEMI with 628 HP with 596 Ft-lbs. of Torque.
|
Re: Engine Swap Ideas
5.7 or 6.1 modern hemi FTW!!!
|
Re: Engine Swap Ideas
LS1!!!!!! Did it in my RX7... and i kick myself daily for selling that car.. I plan on doing it to my XF... one day...
|
Re: Engine Swap Ideas
Well for fitment reasons i would think another V6 one thats cheaper and has more aftermarket support.
Ford 3.8 V6 they came built for forced induction. Exapmple Regal grandnationals, Thunderbirds. and many that run sub 10 sec 1/4 and make over 600 hp. |
Re: Engine Swap Ideas
Near stock Turbo regals and thunderbirds give me competition at the track during Shootout events.
|
Re: Engine Swap Ideas
Originally Posted by GettinIt
LS1!!!!!! Did it in my RX7... and i kick myself daily for selling that car.. I plan on doing it to my XF... one day...
Chuck, can I ask why no Mercedes? Is it simply a financial requirement or is there something deeper behind it? (IE the lack of support and high cost of doing the unknown) |
Re: Engine Swap Ideas
Go BIG Or go home ;) :) :cool:
|
Re: Engine Swap Ideas
I think this would be sweet...............
Ferrari 360 Long Block Engine + Transmission + Harness : eBay Motors (item 220557741826 end time Mar-18-10 13:45:19 PDT) A little pricey, but the sound would be AWESOME!!!!!!!! |
Re: Engine Swap Ideas
I see some good ideas here, a couple I have been considering. The only electronics I am concerned with keeping is the keyless entry/security system and fuel gauge. Our dash is so simply laid out putting a new tach or speedo should not be a problem.
One of the crazier ideas I have been toying with is a turbo slant six. I've had a couple(not turbo) and its a super strong reliable motor. Here is a couple examples, I'm pretty sure they are running stock bottom ends. YouTube - 11 second turbo valiant slant 6 YouTube - Turbo slant 6 - 1/4mile pass |
Re: Engine Swap Ideas
Originally Posted by BoilerUpXFire
A friend of mine has a last gen 7 with an LS1 swap, headers, tune, etc and that car is absolutely insane on a track. Can't wait to get this snow off the ground :D
Chuck, can I ask why no Mercedes? Is it simply a financial requirement or is there something deeper behind it? (IE the lack of support and high cost of doing the unknown) |
Re: Engine Swap Ideas
Let me know if you have any question on the electronics side but I think you're gonna need to leave the electronics in there and just run everything in parallel. Cam or crank trigger inputs on the stock ECU will give you RPM, stock sender in new engine will give you ECT, fuel and speed won't matter as those will still be using the ECU and the factory senders/sensors, kill the ESP/BAS/TC by disconnecting the YAW and SA sensors and you should be set. granted this is paraphrased but you get the idea.
|
Re: Engine Swap Ideas
Go with a 1jz or a 2jz my friend put a 1jz in a 89 conquest Crazy
|
Re: Engine Swap Ideas
Do you think a slant 6 would fit? That's one long engine. I would be in inclined to put a in V-8 if going to the trouble.
Les |
Re: Engine Swap Ideas
briggs and stratton 5 hp motor! with out a benz driveline it turns into another bankrupt mopar car.
no offense but thats the main draw to these cars. if you want big power go lantanas route. support is there and he can make enough power to rip the car in half |
Re: Engine Swap Ideas
Originally Posted by apkano
I think this would be sweet...............
Ferrari 360 Long Block Engine + Transmission + Harness : eBay Motors (item 220557741826 end time Mar-18-10 13:45:19 PDT) A little pricey, but the sound would be AWESOME!!!!!!!! The main problem with a 360 engine is the fact that they don't make much power............and you don't want to know how much mods/maintenance cost for that powertrain. |
Re: Engine Swap Ideas
Originally Posted by 32krazy!
with out a benz driveline it turns into another bankrupt mopar car.
no offense but thats the main draw to these cars. |
Re: Engine Swap Ideas
9" Ford, or Detroit locker rear end, 4-speed, 350 chevy....doesn't need a blower for the hp to weight ratio...just hp....lift those front wheels...but, if I were going to show it....blown hemi, auto, tubbed rearend w/ some monster tires....
|
Re: Engine Swap Ideas
I need to finish mine... just no time for it....
1800 lbs Sm chevy (built) Corvette 6 speed Corvette rear end Nitrous (just in case);) http://i9.photobucket.com/albums/a81/70gt6/GT6ENG.jpg |
All times are GMT -4. The time now is 05:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands