|
dash code I don't recognize
Hi,
I am a new Crossfire owner and love this car and am trying to learn all the ins and outs of it. I have a code that is showing up, briefly when I start the car, started 4 days ago. It comes up instead of the mileage. It looks like a cursive L with a cross like a little t through it, or possibly like someone running. But it doesn't look like a wrench. It started with -100 after it then -200, -300, -400 and now 500. Possibly the numbers mean mileage? I called the dealer in Everett Wa. and they said " well the car is 10 years old and we don't support it in our system any more, but you can bring it in and we will hook it up to a diagnostic machine for $150 to $250 to figure it out. Can't believe they wont simply tell me what the symbol means with out charging me a lot of money. I have tried to find information on the internet too with no luck. I am just not able to find this symbol anywhere. Hope some one here can help me, I just want to take good care of my car with out being taken advantage of. Thanks |
Re: dash code I don't recognize
Sounds like the service reminder. There is an owners manual and service manual for download posted in a sticky. I don't immediately see the link for it.
|
Re: dash code I don't recognize
The owner's book has two full pages of symbols displayed. Do you have an owner's manual?
Check it out. My car is iin my storage locker for the day, but I will check tonight, when i get it home.
Originally Posted by KDW4Him
(Post 817505)
Sounds like the service reminder. There is an owners manual and service manual for download posted in a sticky. I don't immediately see the link for it.
|
Re: dash code I don't recognize
It's telling you it's time for a oil change. The -500 means you're 500 mile over for the 7000 mile oil change.
|
Re: dash code I don't recognize
Originally Posted by #1 Crossfire Girl
(Post 817504)
Hi,
I am a new Crossfire owner and love this car and am trying to learn all the ins and outs of it. I have a code that is showing up, briefly when I start the car, started 4 days ago. It comes up instead of the mileage. It looks like a cursive L with a cross like a little t through it, or possibly like someone running. But it doesn't look like a wrench. It started with -100 after it then -200, -300, -400 and now 500. Possibly the numbers mean mileage? Thanks Here is the procedure to reset back to 7000 to start a new countdown until the next service / oil change RESETTING THE FSS MAINTENANCE INDICATOR AFTER AN OIL CHANGE 1) Move the ignition switch to the “RUN” position 2) Within 4 seconds of moving the ignition switch into the “RUN” position, press the reset button for the trip odometer twice within one second The display for the FSS service request is activated for 10 seconds 3) During the 10 seconds the FSS service request is displayed, move the ignition switch to the “OFF” position The FSS service request will continue to be displayed 4) Press the reset button for the trip odometer and hold 5) Move the ignition switch to the “RUN” position 6) Continue to press and hold the reset button for the trip odometer (about 10 seconds) until the audible signal sounds and the new start distance appears in the display The tool symbol should disappear at this time |
Re: dash code I don't recognize
Found the post with links to the manuals... https://www.crossfireforum.org/forum...ollection.html
|
Re: dash code I don't recognize
Originally Posted by #1 Crossfire Girl
(Post 817504)
I just want to take good care of my car with out being taken advantage of.
|
Re: dash code I don't recognize
Thank you all for all the help with solving my issue. I greatly appreciated it.
|
| All times are GMT -4. The time now is 03:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands