CrossfireForum - The Chrysler Crossfire and SRT6 Resource

Page 2 of 2

Show 40 post(s) from this thread on one page

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)

- Crossfire Roadster (https://www.crossfireforum.org/forum/crossfire-roadster/)

- - new top issue (https://www.crossfireforum.org/forum/crossfire-roadster/79282-new-top-issue.html)

KeithTexas

12-05-2018 03:47 PM

Re: new top issue

Quote:

Originally Posted by ZERACER (Post 915808)

Thank you sir, I will try removing it. These top can be very confusing when they get messed up.

Give it a look and maybe try it. Correction on the above post: I bet I meant to say those are T-30 torx screws...not 30mm torx screws. 30mm would be pretty big.

I had tried spraying some lubricant in there...but that mechanism need some real grease to move easily.

ZERACER

12-06-2018 11:04 AM

Re: new top issue

Thanks Kieth, at least I can now get the bow up. Now I have to figure out what is causing all of my issues.

ZERACER

12-07-2018 02:56 PM

Re: new top issue

Pizzaman where are you? Any ideas?

pizzaguy

12-07-2018 09:20 PM

Re: new top issue

HOw old is the car's battery?

ZERACER

12-08-2018 10:58 AM

Re: new top issue

Thanks for the response. It is less than two years old and starts fine. Somehow it seems to be getting false or incomplete sensor data while being operated.

ZERACER

12-08-2018 11:38 AM

Re: new top issue

When putting it up, it stops about 2 inches shy of being fully raised ans does not beep when it stops. If I push the button another time or two it moves just a little until it fianally beeps and the light on the switch goes out.

All times are GMT -4. The time now is 02:48 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page