Left and Right SL55 Air boxes, and the Left and Right Inlet Hoses.
All you'll need is the Splitter (P/N 113-090-01-29) and hoses for about $100 from OEMPartsDirect.

I paid $250 for these 2 weeks ago and never used them. I did trim the right airbox so it would clear the oil cap on the C32's.
Best offer over $225 takes them. Includes the OEM Air Filters.

These are larger than the C32/SRT-6 Air boxes, allowing more air to flow in.
This setup showed 15 hp on a C32.

Picture of what it looks like installed: (this set is brand new, in the factory Boxes).

 

I'M INTERESTED IF THEY FIT SRT6 OK. PLEASE EMAIL ME DIRECT AT: danwanpen@aol.com

I COULDN'T OPEN THE PICTURE.

 

congrats on the hp bump.

 

I went to the picture URL and it took me to a MB login page.

 

I'll host the pic myself:

025_25.jpg

 

Link to the parts needed:

Air distributor - 5.5 liter - 5.5 liter
http://www.trademotion.com/partlocat...layCatalogid=0

Rear hose Left - 5.5 liter - 5.5 liter
http://www.trademotion.com/partlocat...layCatalogid=0

Rear hose Right - 5.5 liter - 5.5 liter
http://www.trademotion.com/partlocat...layCatalogid=0

 

BTW, these SL55 Boxes have 25% more volume than the C32 and SRT-6 Boxes.

 

can you show side by side comparison for filter size difference? i can't see any difference in your pics.

 

I'd like to see a pic of just the SL55 Y-Pipe...a friend of mine is wanting to convert to that Y-Pipe and try to make his own intake.

Any pics of that item?

Thanks,
Shawn

 

here's a pic of my C32 airboxes, see the difference of room?

CIMG0486.jpg

 

bump...price is neg.

 

$206 shipped

 

I have a full SL55 setup on order - from the Y-pipe all the way to the intake tube along with two green air filters.

If yours are new-in-box - why are you selling them? did they not work out? Can't you take them back to the dealer?

I might add that is a good price$$

 

I believe he is a MB owner, and he told me he decided not to use them on his project (on the MB Forum).

It is a good price if that is the route you are taking.

SQ

 

correct, they did not work out for my project (VRP Carbon Airbox).

cancel your order and buy these.

 

What did you need to do to mod it to clear the oil cap ? and is this applicable to the SRT6 too ?

 

just trimmed about a 1/2 inch from the airbox.
applies to STR6/SLK32 too, as it is the same engine.

FINAL PRICE: $150 picked up in Boston. add $25 for shipping, 3% for paypal.

 

Is it just trimming or do you need to any sort of repair to the area too?

 

I'll do the asking price $175 delivered. Please email me or pm. Thanks.

 

just trimming.