OMG!! My pillar pod looks fabulous guys!!! LOL I assume the pictured one is mine can't wait to get it installed! Great job and keep up the great work!

 

Excellent work guys, both projects look great! I followed your other thread about the pillar pods and I’m glad your efforts were not in vain. Looking forward to the other goodies being developed.

 

Here's another cell vid of the exhaust that Rob sent me
http://www.youtube.com/watch?v=YAwwYYIf3rQ

 

awwww you out the traction control buttons over there! i was hoping they would be under the screen like the alpine car

 

impossible to do as a production stand point, without of coarse buying two consoles and ruining the ashtray sections completely

 

well i dont smoke so i wouldnt mind that one bit!

 

I hope i know where the 3rd one is going...

 

PM Myself or Jonnyangel04. Your situation is special 240. We planned on shipping these out when the core is received and then using that core for the next persons but since yours requires a little more work as it was cut for you to run your existing wires, it wouldn't be fair to send that out to someone else so yours will ship after the entire process is completed. And yes yours will be next.

BTW, For everyone else, I'm not sure if Jon pointed out, there is a core charge of $50 for these if you don't send in your existing pillar. Only way we can keep the price down since that's what it cost for us to run around looking for them and then pay shipping on top of that.

Hope everyone is as stoked about how they look as I am and thank you to those who have already commented about how they look and the work we are doing. It really means a lot and helps us keep doing this.

 

do you have a picture of the dual?

 

the dual and the singles will look just like the triple, minus the first pod, same will go for the duals just minus the top two pods. I think this the best route to keep them low still in the line of sight, and not go the opposite route of them centered or higher.

a lot of people have been asking about having their other side painted to match. I will call the painter tomorrow and see what that will cost, I would have him just spray it with the pillar pods, which may or may not save on cost. Now would be a good time to mention that to match this color and have a comparable if not better then Mercedes Benz paint, we have decided we need to use the best. The best happens to be a Lesonal two stage primmer,and a 3 stage Sikkens paint (colors other then black), followed by 2-3 coats of clear, and wet sanded between each coat. NOT CHEAP and labor intensive, this isn't krylon, some argue this paint is better then house of colors, regardless we are getting what I believe to be a very fair price on the paint work. I am sure the same will be true when it comes to the blank (passenger side pillar). Also worth mentioning it isn't as easy as painting it, we will have to go through with a glazing or finishing filler, sand, fill, sand and so on till it matches the pillar pod (a little thicker, and no pattern). For those who already have theirs painted, and shipped out once you receive it, if you decide you want the blank painted I am sure we can work something out.

A price chart for members (still slightly discounted, but not group members pricing) will be sent to FP and hopefully posted to the rest of the forum, It will include pricing for single, dual, triple, and center console, as well as member pricing for upcoming projects. This pricing will remain for a month or two until our website is up and running.

 

Have you posted a price for them and I just can't see it?
Do you have a price for the up and comming dual setup?
When will the dual pods be available?
I too only need the room for 2 guages.
Enjoy the Ride...
Mike

 

Well, all i can say is WOW! I finally got my pillar pod back and installed and the pictures do not do this fine piece of work JUSTICE!!! Seriously guys, whomever was on the bubble about it all I can tell you is, it was well worth the wait and the money!! It's not bulky and you can hardly tell its there from the drivers side and frontal view IMO. All the gauges are facing you and stepped perfect. The paint matches the exterior perfect! IMO, it almost looks like it "belongs" in the car. There is very little blindspot if any and it does not block the side window defrost vent (which i was worried about). I couldn't ask for a better pillar pod. Thanks Jonny! Way to step up and produce.

 

Ok i think this makes me the first person to have the pillar and gauges installed. Heres my contribution to the worthyness of this piece. See post #222. Yes jonny and rc your pillar has made it into my personal thread you should be very proud lol j/k. Actually im the ones whos proud. Anyone on the fence...this piece is stellar, you will have no regrets! Its 240 approved, i run it and so should you. (cheesy grin and thumbs up).

https://www.crossfireforum.org/forum...833#post268833

 

Very nice - Cant wait to get a boost gauge on mine.
Doesnt the boost seem odd? There are a few time I would have expected lower boost - like going fairly slow and turning but your boost seemed fairly high. Maybe the vid was a bit deceptive being at night.

Guess I need to read on and see if these are available yet...

 

I went back and watched what you were talking about... what you were seeing in the video was vacum as i turned around.

 

That explains it, no negative sign huh. (or just not visible on vid)


Been looking at these gauges - they are supposed to be available soon for the Crossfire:
http://www.aeroforcetech.com/Chryslertech.html

in a GTO but... http://www.youtube.com/watch?v=l3F6CV49Rew

 

Video looks BA, I think I am more excited then you are to get added to your thread and list of modds lol... looks like you are going to have to pick up a set of the SRT6 AEM overlays pretty quick here..

 

OMG where have i been...i didnt realize you were doing AEM overlays, sweet!

 

lol its ok a lot of people dont get wifi in caves Its hard to see the the numbers in the centers but they are there... You can see them better on our website STILL under construction, dont mind the pillar colors. http://www.jr-industries.net/gauges.htm

 

Johnny,
Will you have the digital vaccume/boost gauge also? That and a digital A/F with a IAT or oil pressure gauge would be a sweet combo. Thanks for all the work in getting the pillars and gauges out. How soon will it be before you have pricing and availability on the gauges?

MikeR