Fender Emblem Pics
Fender Emblem Pics
Cleaned it up and put on the larger oem 2006 fender emblems for my wife's 06 SRT that didn't come with them. We are going to purchase one more and replace the smaller badge with one more of these and remove the crossfire lettering too. Enjoy the pics!
DSCN1417.jpg
DSCN1426.jpg
DSCN1422.jpg
DSCN1435.jpg
Just a note, the antifreeze pictured in the garage isn't for either of these cars, the trusty backup Jeep.
DSCN1417.jpg
DSCN1426.jpg
DSCN1422.jpg
DSCN1435.jpg
Just a note, the antifreeze pictured in the garage isn't for either of these cars, the trusty backup Jeep.
Re: Fender Emblem Pics
The side emblems look great. If I owned an SRT I would have done the same.
But the back SRT emblem in the stock place looks like an afterthought just thrown on. I would move it under the right tail light myself.
I like the CROSSFIRE letters on the rear deck and would leave them.
IMO, James
But the back SRT emblem in the stock place looks like an afterthought just thrown on. I would move it under the right tail light myself.
I like the CROSSFIRE letters on the rear deck and would leave them.
IMO, James
Re: Fender Emblem Pics
Chrysler made them oem for 2006 SRT6's but from what I understand they only ended up on the ones exported. I picked both of mine up for $120 on ebay, but that's the best price I've ever seen on them. I think most dealerships sell them around $88 each...part number: 68001757AA
Join Date: Jul 2007
Location: Dallas, the Republic of Texas
Age: 64
Posts: 7,951
Likes: 0
Received 7 Likes
on
7 Posts
Re: Fender Emblem Pics
Originally Posted by srt6shadow
Cleaned it up and put on the larger oem 2006 fender emblems for my wife's 06 SRT that didn't come with them. We are going to purchase one more and replace the smaller badge with one more of these and remove the crossfire lettering too. Enjoy the pics!
When I decided to mount some emblems on my fenders, I got in touch with forum member "Andy G" (from Belfast Northern Ireland). He had posted some photos of his 2006 Aero Blue SRT6, that came from the factory with fender mounted SRT6 emblems, and he had some real good side shots of his car showing exactly where the emblems belong. He also told me that the original emblem was 19 X 148 milimetres. The correct placement is to line up the emblem about 22 milimetres above the the top line of the fender vent line. Keeping the emblem at an angle (lower in front). Then center it.
This is how I mounted my fender emblem.
https://www.crossfireforum.org/galle...hp?photo=25814
I think the red letters go nice with my white car and cedar/slate interior.
Maybe Andy G will post his close-up photos of his front fenders again in this thread, so everybody can see how the factory did it.
Re: Fender Emblem Pics
Originally Posted by ACRucrazy
Wasnt that car having some problems? Like shifting or something? Did you get it figured out?
Also saw it was already asked & answered but the rear plate frame is from ebay. When the larger emblem goes on the back that plate might be a little SRT overkill and may come off.
I tried to line up the emblems best I could judging from the pictures I've seen from all the cars pics posted here already. Thanks guys!!
Re: Fender Emblem Pics
Originally Posted by GatorLCA
idk...the fender badge looks kind of cheesy if you ask me. Seems like it's out of place. I debadged mine and put it on the trunk lid like all the other SRTs...btw that's the best Crossfire color, wish I had that paint for the roadster