Cleaned it up and put on the larger oem 2006 fender emblems for my wife's 06 SRT that didn't come with them. We are going to purchase one more and replace the smaller badge with one more of these and remove the crossfire lettering too. Enjoy the pics!

DSCN1417.jpg

DSCN1426.jpg
DSCN1422.jpg
DSCN1435.jpg

Just a note, the antifreeze pictured in the garage isn't for either of these cars, the trusty backup Jeep.

 

Nice! How much did you pay for the emblem?

 

I thought the anti freeze jug was the bumper stop! Emblems look great. I am undecided to debadge the rear or not.

 

The side emblems look great. If I owned an SRT I would have done the same.

But the back SRT emblem in the stock place looks like an afterthought just thrown on. I would move it under the right tail light myself.

I like the CROSSFIRE letters on the rear deck and would leave them.

IMO, James

 

Chrysler made them oem for 2006 SRT6's but from what I understand they only ended up on the ones exported. I picked both of mine up for $120 on ebay, but that's the best price I've ever seen on them. I think most dealerships sell them around $88 each...part number: 68001757AA

 

Wasnt that car having some problems? Like shifting or something? Did you get it figured out?

 

Those look Great! That little splash of color really gives a mark of class.

 

where did you get the srt tag frame?

 

cool..................

 

I got mine off Ebay. A dealer in AZ sells them on Ebay.

 

Those look very good. I used the ones from SRT6 Dan so they match the rear and the interior styling.

 

Kinda like how you did on your Limited?

 

Shadow you did a real nice job mounting your emblems in the correct position.
When I decided to mount some emblems on my fenders, I got in touch with forum member "Andy G" (from Belfast Northern Ireland). He had posted some photos of his 2006 Aero Blue SRT6, that came from the factory with fender mounted SRT6 emblems, and he had some real good side shots of his car showing exactly where the emblems belong. He also told me that the original emblem was 19 X 148 milimetres. The correct placement is to line up the emblem about 22 milimetres above the the top line of the fender vent line. Keeping the emblem at an angle (lower in front). Then center it.
This is how I mounted my fender emblem.
https://www.crossfireforum.org/galle...hp?photo=25814
I think the red letters go nice with my white car and cedar/slate interior.

Maybe Andy G will post his close-up photos of his front fenders again in this thread, so everybody can see how the factory did it.

 

Here's a picture of my 06. This is where the factory put them on mine.

Les

 

Thanks Les, yours look just like Andys.

 

Exactly! How did you guess

 

Turned out the s/c was turning off supposedly due to a bad i/c pump ground and a fuse was bad. Weird diagnosis, but car runs great now!

Also saw it was already asked & answered but the rear plate frame is from ebay. When the larger emblem goes on the back that plate might be a little SRT overkill and may come off.

I tried to line up the emblems best I could judging from the pictures I've seen from all the cars pics posted here already. Thanks guys!!

 

Thank you for the part numbers in a previous post!

 

idk...the fender badge looks kind of cheesy if you ask me. Seems like it's out of place. I debadged mine and put it on the trunk lid like all the other SRTs...btw that's the best Crossfire color, wish I had that paint for the roadster

 

Nice, I'll have to show my wife this pic! The newer style srt6 emblem really sets off the back compared to the smaller one. For some reason I just don't like the block lettering and font. Add on those rear diffusers and remove the lettering like yours and it looks like it should have came from the factory! Has anyone put Billet Technology emblems on too? I have the traditional chrysler ribbon emblem front and back on my srt8 in black and silver, the oem gold really doesn't match...the only bad part is you have to destroy the old stock emblems to remove. Well worth it though...